CL15G-10(A)
Features:
The automatic switch adopts electronics theory, controlled by water current. The pump, electric booster pump boosts pressure automatically when the tap is on, and turned off when the tap is off. It is used conveniently, and also saves power. Its copper pump body, copper impeller and stainless steel shaft are corrosion-resistant, stainless. The whole pump is sealed well and the conveyed water will be sanitary. Its total suction lift is high. Flow rate is large. It starts well, swithches sensitively and automatically, produces low noise. It also is designed to be low temperature, small volumn, delicate appereance and long-working time. electric booster pumps
Main use:
This pump, electric booster pump absolutely solves the lit fire properly of shower owing to the lower pressure and unreliable pressure. When the tap water is of low pressure, the pump can boost pressure. It can also boost pressure for solar water heaters, boost pressure and circulate water for industrial equipments, and increas oxygen for rearing ponds and fish tanks. GR hot-water pumps boost pressure and circulate hot water for boilers besides above using. GZ best feature is that it can suck tap water from one or two floor below directly. So it compeletely solves the problem that the higher floors don't have water while the lower floors have. electric booster pumps
Nodel Note:
 |
 |
Performance Curves:
Technical Data:
| Model |
Power
(w) |
Voltage
(v) |
Frequ-ency
(Hz) |
Speed
(r/min) |
Input & outlet Dia.
(mm)(in) |
Hig- hest Head
(m) |
Rated Head
(m) |
Max. Cap-acity
(m3/h) |
Rated Capa-city
(m3/h) |
G.W.
(kg) |
Q'ty
(pcs) |
Package Dimension (cm) |
| L |
W |
H |
| CL15G-10 |
90 |
220~240 |
50 |
2860 |
15 |
10 |
6 |
20 |
8 |
25 |
8 |
42.8 |
32 |
27.5 | |
Installation Dimensions:
Structure Chart:
| N. |
Description |
N. |
Description |
N. |
Description |
| 1 |
Tri-grade switch |
8 |
Front-shield |
15 |
Base bracket |
| 2 |
Plug-in unit |
9 |
Bolt |
16 |
Ball bering |
| 3 |
Capacitor |
10 |
Mechanical seal |
17 |
Copper adaptor |
| 4 |
End-shield |
11 |
Automatic switch |
18 |
Copper Impeller |
| 5 |
Ball bearing |
12 |
Terminal box |
19 |
Bolt |
| 6 |
Stator (Coil Winding) |
13 |
Locking nut |
20 |
Copper pump casing |
| 7 |
Rotor |
14 |
Bolt |
|
| | |
